Using Garmin Map 76
Garmin Map 76 Objectives: 1. ... Map 76 Pages 3. ... Under the “Location” tab, Location Format should be “UTM UPS”, Map Datum should be “NAD83”, and North Reference should be “Magnetic”. ... Under the “Interface” tab, Interface should be “Garmin” or “RTCM In/NMEA Out” when the backpack is used. When using the “RTCM In/NMEA”, change the Beacon to “User”, Frequency to “313”, and Bit Rate to “200”. ... SECTION 2 – Map 76 Pages A. ... Press the “Page” button to move to the Map Page. The Map Page shows the current user location on the map. ... Distance can be measured from one location on the map to another. To measure distances from the Map Page, press the “Menu” button and scroll down to “Measure Distance”. Then, move the map pointer with the scroll pad to the next point and press enter. The distance will be displayed just above the map, to the left. ... The Map Page can be customized to suit the user by pressing “Menu” and scrolling down to “Setup Page Layout” and “Setup Map”. ... Tracks and waypoints displayed on the Map Page will be displayed on the Highway Page. ... Waypoints may be stored from any of the Garmin pages by pressing and holding the “Enter” button until the “Mark Waypoint” page is displayed. ... The user may elect to edit the name, symbol, and/or description of the waypoint by scrolling to that data field and pressing “Enter” and then changing the numbers/letters using the scroll tab. ... From the Mark Waypoint Page, the user can elect to show the stored waypoint on the Map Page, navigate to a stored waypoint, or delete stored waypoints by highlighting the appropriate tab and pressing “Enter”. ... Waypoints can be saved in the field and later edited in the office using the above process. ... When saving a track, the Garmin unit gives the user an option to “Save Back Through” a specific time and date, or the “Entire Log”.