Skateboard decks
Making a skateboard deck is easy. I am going to explain a method on how to make a skateboard deck, not the professional way but in a way that you can make a board at your own home. ... Scrap wood really wide & heigh enough for the mould of the skateboard Bandsaw or a machine with a bigger blade to cut the moulds shape Wood Glue Sand Paper and/or a Belt Sander Drill A tool to counter sink the 8 holes for the bolts Bandsaw or a machine with a bigger blade to cut the moulds shape Primer, and gloss spray paint Varnish Step1: So you first step is the mould. ... You should then draw on the center with a pen or pencil the shape of the skateboard exactly how you want it so its ready to be cut into two pieces. ... Step 4: Now you should have the shape of your skateboard in a rectangular shape. ... At this point it should start to look like a real skateboard. ... Now all you need to do is drill the 8 holes of the skateboard (make sure you do them to fit your truck) and then countersink each whole for the screws head to fit.